Now accepting HSA/FSA on eligible orders

Learn more
Talk to an Expert Talk to an Expert
A quality-control inspector recording measurements against the build checklist taped to a Superhuman chamber

Safety & Standards Ask us for the
paperwork.

Every standard here is public. Every document behind it is yours on request.

Talk to an expert Find your chamber
Certified
ASME Section VIII

The factory holds the certificate.

Testing
Tested to PVHO-1

The code for vessels with someone inside.

Inside
Four systems

Every one of them works for you.

Paperwork
Every document

Yours on request.

Assembly to arrival

Built for the person inside.

Our hard-shells are built in an ASME-certified factory. The record kept against the serial number is what lets us tell you exactly what happened to the chamber you get into.

Request the paperworkFind your chamber
A woman reclined in the seat inside a Superhuman chamber, breathing through an oxygen mask

Nothing runs at its limit.

A relief valve caps the pressure mechanically, whatever the controls are doing. Nothing in software can raise it.

We set it below the vessel's rated maximum and check it on every chamber before it ships.

You are never sealed in.

Depressurization can be started from inside the chamber, as well as from outside.

Both controls are built in, because the person who most needs the door open is the one already behind it.

Someone outside sets the bar.

ASME writes the code for pressure vessels with a person inside, and it begins at 2 psi where ordinary vessel rules begin at 15.

Our hard-shells are built in an ASME-certified factory.

Built in an ASME-certified factory

Every hard-shell is built in a factory that holds an ASME certificate.

ASME U-stamped vessels are available on request.

Who sets the bar

Five standards.

Tap one for what it governs and which chambers it covers.

Most of this industry names a standard and stops there. Every one below comes with what it governs, which chambers it covers, and the document you can ask for.
Superhuman T4 multi-person hard-shell chamber
Superhuman T4 Multi-Person Hard-Shell
Superhuman T2 two-person hard-shell chamber
Superhuman T2 Two-Person Hard-Shell
Superhuman X seated hard-shell chamber
Superhuman X Seated Hard-Shell
Superhuman L1 lying-down hard-shell chamber
Superhuman L1 Lying-Down Hard-Shell
Superhuman S1 portable soft-shell chamber
Superhuman S1 Portable Soft-Shell
ASME PVHO-1 Vessels with a person inside.
Starts at 2 psi. 		Tested to Tested to Tested to Tested to Certification in progressListed here once issued.
ASME Section VIII Steel, thickness, welds.
The factory holds the certificate. 		Certified Certified Certified Certified Not applicableSoft shell, no steel pressure vessel.
ISO 13485 Medical device quality management.
Entity, not chamber. 		Applies to all of our chambers.
ISO 9001 General quality management. Applies to all of our chambers.
CE / UKCA EU and UK market conformity.
The manufacturer declares. 		CE, PED CE, PED CE, PED, UKCA CE CE
ASME PVHO-1

Vessels with a person inside. Starts at 2 psi.

  • Tested to
  • Tested to
  • Tested to
  • Tested to
  • Certification in progress Listed here once issued.
ASME Section VIII

Steel, thickness, welds. The factory holds the certificate.

  • Certified
  • Certified
  • Certified
  • Certified
  • Not applicable Soft shell, no steel pressure vessel.
ISO 13485

Medical device quality management. Entity, not chamber.

Applies to all of our chambers.

ISO 9001

General quality management.

Applies to all of our chambers.

CE / UKCA

EU and UK market conformity. The manufacturer declares.

  • CE, PED
  • CE, PED
  • CE, PED, UKCA
  • CE
  • CE
ASME

ASME certification is the globally recognized mark of engineering integrity.

Our hard-shells are built in an ASME-certified factory, and the vessel design is tested to PVHO-1 standards. The pressure vessel safety code used by hospitals, clinical facilities and military operators worldwide.

Before it ships

"That's the only way we can control every single little bit."

Every chamber runs 100 hours across its components before it leaves the floor. Every one, not a sample. If anything drifts in that time, it does not ship.

Our own testing, not a certificate somebody else issued, so we hold the record and yours is available on request.

Book a 5-minute fit callFind your chamber
Porsche Ma, CEO of Superhuman, explaining the 100-hour test every chamber runs before it ships

Porsche Ma, CEO

Why it's safe

You step in.
Four systems do the rest.

They act the moment they need to. Not one of the four waits for an instruction, and your part ends at the door.

Close-up of the mechanical pressure relief gauge on a Superhuman chamber
A woman seated inside a Superhuman chamber, reaching toward the open door, oxygen tubing and a monitor behind her
The intercom handset mounted beside the screen on the outside of a Superhuman chamber
The control panel on the outside of a Superhuman hard-shell chamber, with the oxygen and pressure readouts on screen and the intercom handset beside it

  • A relief valve holds the line whatever the controls are doing. Nothing in software can raise it.

  • Depressurization can be started from inside the chamber as well as from outside.

  • Two-way intercom for the whole session. You can see out, and someone can see you.

  • Both read on the panel outside for the whole session. Hard-shells sound an alarm on a drift, a leak or a loss of power.

Your 5 minutes with a specialist

Your space first, then the chamber.

Check the fit

FAQ

The questions people actually ask.

Do I need a prescription or a licence to own one?

That depends on where you are. We confirm what applies to your address before your order is final.

Can I see the documents before I buy?

Yes. Ask on the call, or request them below.

What if my state or country has extra rules?

The site assessment lists them, before your order is final.

The lineup

That's the paperwork.
This is what it's for.

Five of them, from a soft-shell that folds away to a walk-in for four. The room decides more than the budget does.

Seated

Full pressure, seated.

You sit up, read or work, at 2.0 ATA, in the least floor space of the two hard-shells.

Seats
1
Pressure
Up to 2.0 ATA
Door
Full-height glass
Noise
Conversation level

From $79,900

Explore X
Superhuman X seated hard-shell chamber with its touchscreen control panel and round side window

Two seats

Built for two.

Walk-in, 1.5 or 2.0 ATA, two people at once. Two chairs, a bed, a lounge or an L-shaped bench: the layout is yours to set.

Seats
2
Pressure
1.5 or 2.0 ATA
Door
Polycarbonate door
Noise
Conversation level

From $99,900

Explore T2
Superhuman T2 two-person walk-in hard-shell chamber

Four seats

Four at a time.

Walk-in, 1.5 or 2.0 ATA. Same cabin height and width as the T2, with more length for four seats or bench layouts.

Seats
4
Pressure
1.5 or 2.0 ATA
Door
Polycarbonate door
Noise
Conversation level

From $129,900

Explore T4
Superhuman T4 four-person walk-in hard-shell chamber

Lie-flat

Lies flat. Stays quiet.

Flat for the whole session, at 2.0 ATA, and quiet enough to share a wall with a bedroom.

Seats
1
Pressure
1.3 / 1.5 / 1.7 / 2.0 ATA
Door
Sliding door
Cabin
Under 8 ft 3 in longUnder 2.5 m long

From $49,900

Explore L1
Superhuman L1 lie-flat hard-shell chamber

Portable soft-shell

The portable way in.

Single-person, folds down, no permanent installation.

Seats
1
Pressure
1.3 to 1.5 ATA
Door
Zipper entry
Noise
Quiet operation

From $14,900

Explore S1
Superhuman S1 soft-shell chamber, zipped open

First step

Want the documents for your chamber?

Give us the date and we’ll work back from it. Delivery, install and the staff walkthrough all have to happen before your first booking. Hard-shells typically take 3 to 5 weeks from order.

Request the paperwork Find your chamber

Or just contact the team directly.

[email protected] (415) 802-2479

Superhuman chamber documentation: the complete-system overview and the specification sheet