Seated
X: Seated, and it fits the smallest rooms.
One client, sitting up at 2.0 ATA, in the least floor space of the three walk-ins.
- Seats
- 1
- Pressure
- Up to 2.0 ATA
- Door
- Full-height glass
- Noise
- Conversation level
From $110,000
Explore X
For your business Give your members
a reason to rebook.
Hyperbaric chambers for clinics, recovery studios and wellness clubs. Installed, and your team trained, before opening day.
The walk-ins
Sized to your bookings.
One, two or four clients at a time.
Your space decides which ones fit.
2-person walk-in
T2: Built to run all day.
Two clients share each session, at 1.5 or 2.0 ATA. Seats, a bed or a bench.
- Seats
- 2
- Pressure
- 1.5 or 2.0 ATA
- Door
- Polycarbonate door
- Noise
- Conversation level
From $125,000
Explore T2
4-person walk-in
T4: The one that keeps a group moving.
Four seats or a bench, so a group books one session. Same cabin as the T2, 23 cm longer.
- Seats
- 4
- Pressure
- 1.5 or 2.0 ATA
- Door
- Polycarbonate door
- Noise
- Conversation level
From $169,000
Explore T4
Fit first
We measure before you sign.
Four things decide whether a chamber works in your space. We check all of them on a 5-minute call.
-
The first thing we check. Send us the route in and we'll tell you which models make it. If it doesn't fit, we'll tell you that too.
- Tell us about the space →
Why us
You open the doors.
We handle the machine.
From the site survey to the first service call, all four steps are on us.
-
Doorway, lift, floor and circuit, checked against your model. Nothing ships until the space passes.
-
We bring it in, set it up, and run a full session with you before we leave.
-
Whoever runs it learns on your chamber, on-site: daily operation, session flow and safety procedures, before we leave.
-
Every chamber comes with a two-year warranty and lifetime support: replacement parts and a real engineer on the line.
From the founder
It doesn’t ship unless
I’d put it in my own house.
I couldn’t find a chamber I’d sign off on, so I built one.
We build in an ASME-certified factory. Every chamber is independently tested to PVHO-1 standards, and every one runs. Everyone who works here has been inside one. We look at your room before you spend anything.
Built right and wrong for your doorway is still wrong.
The buying committee
Ready for every sign-off.
Each reviewer needs different paperwork. Open the card for whoever you're sending it to.
The math
Run it with your numbers.
Your price and bookings, run as conservative, base and upside. Not a guarantee.
Gross revenue per year
$312,000
Conservative $187,200 (40% fewer sessions) · Upside $405,600 (30% more)
Excludes staffing, insurance, taxes, maintenance, marketing, downtime, regulation and demand.
New to chambers?
The hour your
clients book.
Know every minute of a session, and the paperwork behind it, before your first client does.
FAQ
What operators ask first.
How soon can we open?
Typically 3 to 5 weeks from order, depending on the model and your location. Install and training happen on-site once it arrives.
Do we need a clinician on staff?
A trained operator should be available during every session, and we train yours. Whether you also need a clinician depends on where you operate, so check before you sign.
Will our insurer cover it?
That’s their call. We send them the documents they ask for, from the ASME certification to the PVHO-1 pressure-testing record.
What if it needs service?
Call us and we take it from there, with remote diagnostics and replacement parts. You don’t chase a part or a technician.
Can we finance it?
Yes. Financing is arranged through third-party lenders, with terms from 12 to 84 months. Rates depend on your profile and location.
Can we roll it out to more sites?
Yes. Same chamber, every location you open, with the same survey, install and training at each site.
First step
Tell us when
you're opening.
Give us the date and we'll work back from it. Lead time is typically 3 to 5 weeks, and if that's tight, we'll tell you on the call.
Or just contact William directly.
